Item # |
Description |
Price |
Click for more detail...
T28150 |
Jacobs Drill Chuck 5/64-1/2 No. 33B w/ Key
This is a nice clean, vintage 3-jaw drill chuck marked "JACOBS CHUCK HARFORD CONN. MADE IN U.S.A. NO. 33B 5/64-1/2 CAP. THD. 1/2-20". It's in very good working condition with good jaws, adjusts smoothly, appears to have never been used. It is designed to be fitted with an arbor that has a 1/2-20 at one end to fit into the threaded hole on this chuck. These arbors are still available for sale by Jacobs. The key for the chuck is included, and is in very good condition. |
|
 |
Click for more detail...
T28141 |
Jacobs Drill Chuck 5/64-1/2 Cap. No. 34 w/ Key
This is a nice clean, vintage 3-jaw drill chuck marked "THE JACOBS MFG. CO. HARFORD CONN. MADE IN U.S.A. JACOBS DRILL CHUCK PAT. 1902 NO. 34 1/2" CAP.". It's has 5/64-1/2" CAPACITY, is in very good working condition with very good jaws, adjusts smoothly, appears to have been used, but very little wear, however, we do note some dings on the end plate where the arbor will fit, and a few on the end plate where the jaw slide in, but no effect on use, stricktly a cosmetic issue. It is designed to be fitted with an arbor that has a 5/8" tapered end at one end to fit into the precision hole on this chuck. These arbors are still available for sale by Jacobs. The key for the chuck is included, and is in very good condition. |
|
|
Click for more detail...
T28191 |
H.S.B. Revenoc Fore Plane No. 6 size Rare!
This is a unique, No. 6 size metallic fore plane, with the rare Hibbard, Spencer, & Barlett Co. mark on the cutter. The cutter is actually marked "H.S.B. REVONOC", and this is the only marked on this plane. The H.S.B. Co. has 100 year history of distributing all sorts of quality tools, made by other companies in many case, from it's Chicago distribution location. This is a very nice, clean example of a fore plane they supplied in about the 1930's era. There is only some minor differences between this plane and the Stanley No. 6 from the type before the introduction to the frog adjustment screw (there is no frog adjustment screw in the design of this H.S.B. plane). Otherwise a few other minor differences are the shape of the front knob, the shape of the lateral adjustment lever, and the depth adjustment wheel seems to be steel, not brass. The cutter is very sharp, plenty of stock left for future sharpening. This plane is 18" long with a 2.37" wide cutter. There is no frog adjustment screw for this model, as from the factory. The condition is very good with about 90% Japanning intact, good solid hardwood handle, and knob, no cracks, some tiny dings noted, nice looking hardwood with a natural finish. There is a few minor dings on the plane, a few very small areas of pitting on the bed on a little on the cap cover, and chip breaker, but over all, very good condition. A very rare plane! On quality, very comparible to Stanley quality, very nice cast parts, quality cutter material, all adjustment work great! Quality made! |
|
|
Click for more detail...
T28251 |
Heller Masterench Pipe Wrench 18 in. Rare! MasterWrench
This is a very scarce 18" pipe wrench marked "18" MASTERENCH CHROME VANADIUM" on one side, and "PATENTED 4-14-23 & 7-5-27 NEWARK N.J. U.S.A.", and has the standing horse logo also. MASTERENCH". The trade name sounds like Masterwrench, but the W is dropped in the actual name. The Heller name has been partially ground off but enough there to confirm the maker is Heller. We have seen only one other in this size in the past ten years in anywhere near this good of condition, as the 18" size is rare. This one has been used very little, has a very good pivot joint, and the double spring is still in good working order, so the jaw returns to the closed position as it is suppose to. The jaw teeth are very nice, only minimal wear. The jaw is .99" wide. There is no rust on this wrench, no cracks, no bent areas, very nice. The finish is a darkened finish, has some minor original casting imperfections, but those are on the handle section, and will not effect use. A good straight, hard to find, collectible adjustable wrench! |
|
|
Click for more detail...
T28247 |
Stillson Adjustable Pipe Wrench 18 inch Henry & Allen
This is a very nice clean, 18" long STILLSON pipe wrench marked "STILLSON WRENCH MFG. BY HENRY & ALLEN AUBURN N.Y. U.S.A. GUANTEED 18" in cast lettering. This one has been used, but overall is in very good working order, not bent, cracked or otherwise damaged, a small hammer dings on the handle area, jaw area is very good, very good jaw teeth, two good springs, good knurl and gear teeth, adjusts just fine, no rust, no pitting, good pivot joint, with no original intact, no rust, no pitting, useable condition. This is a good antique wrench made about 100 years ago.
|
|
|
Click for more detail...
T28224 |
Goodell Pratt Speed Indicator w/Rubber Tips Tachometer
This is a nice clean used machinist speed indicator with three interchangeable attachments included that will press fit onto the end of the main shaft. It's marked "GOODELL-PRATT MADE IN U.S.A." on the indicating dial face area. It is rust free, some minor finish staining or darkening, works fine. It measure 4.5" long overall. This is a hard to find quality made machinist tachometer, by a well known maker! |
|
|
Click for more detail...
T28228 |
Goodell Pratt Hand Crank Hand Drill Single Speed
This is a nice clean quality made egg beater type single speed hand drill marked "GOODELL-PRATT GREENFIELD MASS. U.S.A.", on the crank handle. This one is 11.37" long overall, and has a 3/16" diameter chuck capacity. The crank handle is rosewood, and still in very nice condition, snug fitting, nice finish. Overall the paint is about 60% intact overall, none on the crank wheel, frame has most all paint intact, no rust or pitting. The gears and all the spindles are in great shape. The end handle is hollow brass, and is threaded so it fits the end of the drill body in good condition. This brass cap provides a place to store your drills if you wish, there is a nice set of small spiral drills included, all are in very good to new condition. (you can use standard straight round shank drills with this tool). The chuck on this style drill is 3 jaw type, spring loaded jaws, and all the springs are in good working order. A good solid tool, nice design, works very smoothly, ready to use or display! This model, or one about 95% like it, was originally patented in 1895, however, this drill has no patent dates on it, but is marked "GOODELL-PRATT COMPANY" on the chuck shaft also. |
|
|
Click for more detail...
T28217 |
Starrett Outside Spring Caliper 4 Inch No. 79 Yankee
This is a good old used 4" spring outside caliper(4.75" long overall. Known as the Yankee pattern, No. 79-4 in the old Starrett catalogs. Nice design, in good condition with some darkening to the finish, a past owner's intials on one side, little wear on the tips, no rust, works fine, good threads on the fine adjustment. It is clearly marked "The L.S.STARRETT CO. ATHOL MASS. U.S.A.". A nice clean tool overall! |
|
|
Click for more detail...
T28211 |
Starrett No. 73 Inside Spring Calipers 3 Inch
This is a very good used No. 73 inside caliper, with the solid fine adjustment nut. This caliper is in very good condition overall with no owner's names, no noted wear, no rust, fine condition overall. It is marked "THE L.S. STARRETT ATHOL MASS. U.S.A." on one side.
|
|
|
Click for more detail...
T28214 |
Starrett No. 73 Inside Spring Calipers 3 Inch
This is a good used No. 73 inside caliper, with the solid fine adjustment nut. This caliper is in very good condition overall with no owner's names, no noted wear, no rust, some minor darkening on the finish, a few tiny pitted area, very good tips joint and spring. It is marked "THE L.S. STARRETT ATHOL MASS. U.S.A." on one side. |
|
|
Click for more detail...
T28279 |
Utica Wire Cutting Pliers 3 Cutter Sections No. 1000-8
This is a good, used, 8 inch long pliers marked "UTICA 1000 UTICA N.Y. U.S.A." with the antique 3 diamonds logo. The jaws, and all three wire cutting sections are in good shape. As you can see in the pictures, there is some minor wear on the outside of the jaws mostly, the inside jaw grips, and cutters are in very good shape overall. There is a few dings around one side of the pivot area noted, but no cracks, no rust, or other damage. A quality made used pliers by a well known tool maker!
|
|
|
Click for more detail...
T28275 |
Pexto Electrical Pliers No. 30-8 Wire Cutter
This is a very nice quality 8" long electrians pliers marked "PEXTO P.S. & W. CO. U.S.A. 30-" around the pivot pin area. Pexto is the trade name used on many tools made by Peck, Stow, and Wilcox. In very good working condition, no rust, no pitting, very good jaws and cutter, very good joint, minimal wear, about 99% like new! The jaw thickness on this one is 5/8", considered to be heavy duty type. A hard to find model, by a well known, quality tool manufacturer!
|
|
|
Click for more detail...
T28256 |
Keystone Westcott 6 inch S-Handle Adjustable Wrench
This is a nice clean old 6" long S-Handled adjustable wrench marked "THE KEYSTONE MFG. CO. WESTCOTT 6 INCH NO. 76 BUFFULO N.Y. U.S.A.". Overall in good condition no rust or cracks, a few tiny nicks and dings, some minor wear on the jaw edges mostly. A good working collectible curved handle wrench! Works good!
|
|
|
Click for more detail...
T28264 |
Trimont Trimo Adjustable Monkey Wrench 12 inch
This is a very nice, 12" adjustable nut wrench, marked "TRIMO TRIMONT MRG. CO. ROXBURY MASS. U.S.A. TRIMO SIZE 12" PAT'D 12-19-1911" on the handle area, and "DROP FORGED" on the moving jaw. In good++ condition with very little wear, no rust, good straight metal and gears. The jaws edge show a few dings on the edges, but much better than most, and the jaws align well with one another. We note a few small hammer dings on the end of the handle, otherwise a very carfully used wrench by the looks of it. The knurled thumbwheel design works great as it incorporates a stamped steel washer, that helps the thumb wheel turn much easier than those without this feature. The washer is formed to fit into the knurl so it doesn't spin round and round. A very nicely designed hard to find size, nice clean wrench, from the early 1920's era. Measures 11" long (completely closed) even though it is marked 12" on the wrench, and the jaws are 3/4" thick.
|
|
|
Click for more detail...
T28269 |
Lawson Pipe Wrench 12 inch U.S. Hame Co. 14 inch
This is a nice antique, 14" adjustable pipe wrench, marked "14 USHCO LAWSON U.S. HAME CO. BUFFALO N.Y. U.S.A. PAT. DEC.14.20 OTHER PATS PEND". This is a rare pipe wrench with a angled knurl slot patent that used gavity instead of moving jaw spring load to keep the moving jaw in it's proper position. Works good! In good+ condition with very little wear, no rust, very good jaw teeth, knurl thread and jaw gears. The jaws show very little wear overall. We note a few small hammer dings on the the handle, and the handle is slight bend on it's width, not noticeable if laying flat or hanging on a wall, otherwise a very carfully used wrench by the looks of it. Measures 13" long (completely closed) even though it is marked 14" on the wrench, and the jaws are 3/4" thick. A very rare and collectible patented antique pipe wrench! |
|
|
Click for more detail...
T28284 |
Antique Horse Harness Buckle Tack Center Post
This is a nice solid bronze, antique center post harness strap buckle, designed for a 1" wide leather strap. The height of the center post is .44" or 7/16" high x 3/16" diameter at the top. The buckle is .5" thick x 1.75" wide x 2.25" long. Each buckle is marked in cast lettering "SOLID BRONZE". A very hard to find early 1900's era heavy duty strap, belt buckle! Price is per each one, you can order as many as are listed in the quantity box. |
|
|
Click for more detail...
T28292 |
Antique Horse Harness Hook Buckle Tack Bronze
This is a nice solid bronze, large size antique hook harness strap buckle, designed for a 1.5" wide leather strap through the narrow slot, and the wide oval shaped opening is about 2.25" wide. The width of the center hook is .38" or 3/8", designed to hook onto a diameter of about 1/2" diameter. The buckle is .88" thick x 2.5" wide x 2.7" long. Each buckle is marked in cast lettering "SOLID BRONZE". A very hard to find early 1900's era heavy duty strap, belt, harness hook buckle! Price is per each one, you can order as many as are listed in the quantity box. |
|
|
Click for more detail...
T28296 |
Antique Horse Harness Brass Buckle Tack Bullseye
This is a nice solid brass, antique horse brass, or saddle strap buckle, designed for a 5/8" wide leather strap through the swivel loop or the slot. All 4 are included in this sale, these are old, and may be made to cover a heavy duty snap since the bullseye form is raised so it would give clearance on the inside for a snap up to 1/2" diameter. The buckle is .35" thick x 1.18" wide x 1.75" long. As you can see in the pictures 3 of the 4 are in very good shape, while the 4th has a slight scrape on one small area near the swivel loop. A very hard to find early 1900's era fancy saddle bag flap strap buckle! Price is for all 4 as shown in the picture. These are all we have of this type, never seen likes of these before. Don't miss out. |
|
|
Click for more detail...
T28300 |
Antique Horse Harness Brass Decorative Strap Cover
This is a pair of nice brass decorative strap covers of bridal brasses, antique horse brass, or buckle. Both are included in this sale, these are old, and may be made to add decoration to a harness or bridal, not sure, but these two came with a group of horse tack items we have purchased all are hard to find items, many are unique in the way they were made. These for example are brass on the outside, and steel on the inside part. The steel or iron has had some pitting on it, but is not rusty now. As you can see there is some dings, and dents, a few scratches, but from a distance will still serve the purpose. Each 1/2" thick x 2" diameter. The loop on the back is designed to allow a leather strap up to 1.12" wide to past through, and thickness of the straps can be up to 3/8" to fit. A very hard to find early 1900's era decorative strap brass! Price is both as shown in the pictures. These are all we have of this type, never seen likes of these before. Don't miss out. |
|
|
Click for more detail...
T28329 |
Jacobs Super Chuck No. 14N 0-1/2 w/Arbor Ball Bearing
This is a very nice, used 1/2" capacity ball bearing super chuck marked "JACOBS U.S.A. 14N 3 JT SCV. KIT #30345 1/8-1/2 IN 0-13mm CAP." near the jaws, and also marked "JACABS BALL BEARING SUPER CHUCK" around the chuck sleeve at the 1/2" diameter arbor end of the chuck body. The arbor has a few scratches noted, none effecting used, no sign of damage or abuse. We also note a past owner's name on the end cap plate on the chuck. The ball bearing movement operates very smoothly with little effort, and no binding. The jaws are in very good condition, no sign of wear. Comes with a nice chuck key. The key is also marked "JACOBS #3 KEY" on it.
A very nice used precision drill chuck overall! |
|
|
